This calculator converts single-sideband phase noise (in dBc/Hz) into phase jitter (in seconds RMS).
Enter offset frequencies in order from lowest to highest below. Enter numbers as integers, decimals, or use scientific notation (for example, enter 1500 as 1500, 1.5e3, or 1.5E3). Select the desired data by selecting the appropriate checkbox (the calculation will include data up to the first unchecked Enable Data box).
The carrier frequency must be below 1E12 Hz, the offset frequency is limited to 100GHz, and the phase noise must fall in the range of 0 to -200 dBc/Hz.